1 (888) 765-0814
634 Fourth Line, Caledonia, Ontario
just 8 minutes South of Caledonia

Ventrac Attachments

Ventrac Attachments

With over 30 Attachments to choose from, Ventrac is your one tractor solution to all year round needs. Choose from the categories above to find attachments that meet your needs.

DEBRIS/SNOW REMOVAL
Ventrac Blades

Blades

Ventrac KD Power Angle Blades have working widths of 48, 60, and 72 inches (122, 152, 183 centimeters). All control functions are performed with the S.D.L.A. control for raising and lowering the blade or angling it left or right. Adjustable skid shoes accommodate dozing at selected heights, such as moving snow on gravel driveways.

1-888-765-0814

Ventrac 4500 Series Blower

4500 Series Blower

The revolutionary KA160 Power Blower features a vertical shaft design that delivers a powerful, yet quiet performance. The blower can be used to remove leaves, light snow, water, etc. The blower housing can be rotated 180 degrees with the standard hydraulic motor. This allows the operator to move debris in the desired direction without hindering operation. Two gauge wheels maintain a consistent distance from the surface.

1-888-765-0814

Ventrac 3400 Series Blower

3400 Series Blower

The revolutionary LA162 Power Blower features a vertical shaft design that delivers a powerful, yet quiet performance. The blower can be used to remove leaves, light snow, water, etc. The blower housing can be rotated 180 degrees with the standard hydraulic motor. This allows the operator to move debris in the desired direction without hindering operation. Two gauge wheels maintain a consistent distance from the surface.

1-888-765-0814

Ventrac 4500 Series Broom

4500 Series Broom

The HB580 Power Broom is designed for sweeping and removal of material such as snow, leaves, dirt, light gravel, and even thatch. A corner-less frame design permits sweeping against curbs and allows for the cleaning of corners.

1-888-765-0814

Ventrac 3400 Series Broom

3400 Series Broom

The LB540 Power Broom is designed for the sweeping and removal of snow, leaves, dirt, light gravel, and other materials from parking lots, sidewalks, and other surfaces. Heavy duty nylon bristles make short work of any clean up job without damaging the surface below.

1-888-765-0814

Ventrac 4500 Series Snow Blower

4500 Series Snow Blower

The 52" wide Ventrac KX523 Snow Blower is built for commercial snow clearing operations of sidewalks, driveways, and other areas. A two stage snow blower, the KX523 features a 16" diameter solid auger for best snow transfer, a large 20" diameter fan, and the ability to move 4500 pounds of snow per minute at distances up to 40 feet. Standard features include adjustable cast iron skid shoe discs at the rear, high carbon hardened steel shoes at the side, and a reversible high carbon hardened steel cutting edge.

1-888-765-0814

Ventrac 3400 Series Snow Blower

3400 Series Snow Blower

The 42" wide LX423 Snow Blower for the Ventrac 3000 series is built for commercial snow clearing operations of sidewalks, driveways, and other areas. A two stage snow blower, the LX423 features a 16" diameter solid auger for best snow transfer, a large 20" diameter fan , and the ability to move 2500 pounds of snow per minute at distances up to 40 feet. Standard features include adjustable cast iron skid shoe discs at the rear, high carbon hardened steel shoes at the side, and a reversible high carbon hardened steel cutting edge.

1-888-765-0814

Ventrac Turbine Style Blower

Turbine Style Blower

The Ventrac ET200 makes quick work of any clean up job. The Turbine Style Blower is designed to blow large volumes of air, and is much quieter than a conventional leaf blower. The ET200 can be used to blow leaves, light snow, and remove debris from sidewalks, parking lots and other areas.

1-888-765-0814

Ventrac V-Blade

V-Blade

The 55 inch Ventrac KV552 V-Blade maximizes efficiency with the ability to quickly change from V plow to Scoop to straight blade, all from the convenience of Ventrac's exclusive S.D.L.A. control system. With a 48" V width, the KV552 is ideal for walks and areas that larger blades are unable to plow.

1-888-765-0814

Ventrac Vacuum Collection System

Vacuum Collection System

The Ventrac RV602 VACUUM COLLECTION SYSTEM is for grass and leaf collection, and it consists of three primary components: the bin assembly - mounts to the rear of 4000 series tractors. the suction/blower system - powered by a 10HP Vanguard engine with electric start for efficient pickup and superior performance high lift mechanism - hydraulically raise the collection bin up to 60" and dump to unload the contents into a garbage bin or trailer.

1-888-765-0814

Ventrac Spreader, Broadcast SS300

Spreader, Broadcast SS300

The Ventrac SS300 salt spreader is for winter services, and is designed to spread bagged rock salt and calcium flake. It features a 3 cubic foot capacity. An electronic control box comes standard and features an electronic speed control and On/Off switch An optional Drop Curtain is available for spreading material in tight quarters such as sidewalks, parking garages and more. The SS300 fits the 3000 series tractors.

1-888-765-0814

Ventrac Spreader, Broadcast SS575

Spreader, Broadcast SS575

The Ventrac SS575 spreader is designed for Snow & Ice Management Applications. It is used to spread materials such as bagged rock salt, calcium flake, calcium pellets, and bagged ice melts. An optional vibrator kit also allows for bulk salt to be spread.

1-888-765-0814

Ventrac Spreader, Drop SA250

Spreader, Drop SA250

The Ventrac Sidewalk Drop Spreader is the ultimate tool for spreading an array of deicing materials with precision flow control. Designed with a narrow frame and a 40" drop pattern, this spreader is ideal for spreading material on sidewalks and other narrow walkways.

1-888-765-0814

SOIL/SITE PREPARATION
Ventrac Landscape Rake

Landscape Rake

The 49-inch Ventrac KR Landscape Rake performs a variety of landscaping tasks. From soil preparation, leveling ground, to removing rocks and debris, the KR502 works with ease and efficiency.

1-888-765-0814

Ventrac Power Buckets

Power Buckets

Ventrac Power Buckets are a must for any Ventrac owner. The scoops are great for transporting material such as soil, sand, gravel, mulch, debris, snow, and much more. Used for landscaping, excavation, backfilling, leveling, digging and grading, the Power Buckets are an indispensable attachment from construction sites to your own backyard, allowing you to say goodbye to your old wheelbarrow.

1-888-765-0814

Ventrac Power Rake

Power Rake

The KP540 Power Rake is designed for leveling rough ground and new yard installations, as well as removing surface rocks and debris. Its compact design allows the operator to work in tight quarters including around corners and edges.

1-888-765-0814

Ventrac Tiller

Tiller

The KL480 Tiller is designed for easy preparation of gardens and yards. This power-driven front-end attachment allows the operator to easily monitor the Tiller's performance. Designed with the Ventrac Mount System, the Tiller can be attached in a minute or less and comes with a stand for storing the Tiller when not in use.

1-888-765-0814

Ventrac Trencher

Trencher

The KY400 Trencher is capable of trenching up to 40 inches (102 cm) in depth with a 5 1/2 inch (14 cm) wide cut. It is designed with dual Push-N-Pull cylinders to assure positive boom control for digging, boom lift, and transport.

1-888-765-0814

Ventrac VERSA-Loader

VERSA-Loader

The Ventrac KH500 VERSA-Loader is one attachment capable of performing several different tasks. The VERSA-loader offers you a standard 5 cubic foot bucket capable of lifting 500 pounds over 6 feet high. The versatile design allows you disconnect and get attached to other optional attachments in minutes without tools or heavy lifting.

1-888-765-0814

TURF MAINTENANCE
Ventrac AERA-Vator

AERA-Vator

The AERA-vator is designed to stir and loosen the soil beneath the sod without destroying the turf. The EA600 creates a core hole without bringing a core plug to the surface, leaving the turf ready for use immediately after treatment. Six holes are created each foot (66 holes per square meter) and hole size is regulated by drive speed-- the slower the drive speed, the larger the hole.

1-888-765-0814

Ventrac Aerator

Aerator

The Ventrac EB480 Aerator offers the exact tools to address your turf grass conditions. No matter what treatment your turf requires, coring, slicing, or fracturing, the EB480 can be easily configured to suit your requirements. The tines are replaced either individually or by quickly changing the entire mounting heads. This gives the EB480 both versatility and longevity to best accommodate your needs.

1-888-765-0814

Ventrac Contour Deck Mower

Contour Deck Mower

Ventrac's Contour Mower features a 83-inch working width making quick work of any mowing job regardless of the terrain without sacrificing quality of cut. Three decks float independently and follow the contour of the terrain with up to 40 degrees of motion for each side deck. The MJ840 also features full rear rollers for even cutting and striping, rear discharge, and a flip-up deck design.

1-888-765-0814

Ventrac Field Mower

Field Mower

The LQ450 Field Mower is designed to cut heavy grass and small brush growth. Two counter-rotating blades discharge the cut grass to the center rear. Suspended front chains allow tall grass to be cut more effectively and reduce the potential for front discharge. Three pins provide three cutting height options: 2 1/4, 3 1/2, and 4 3/4 (5.7, 8.9, and 12.1 cm).

1-888-765-0814

Ventrac 4500 Series Rear Discharge Mower

4500 Series Rear Discharge Mower

The Ventrac MC600 Rear Discharge Mower is designed for superior trimming on both the left and right sides. With its 60-inch cutting width and 15 cutting positions, mowing just became a lot more fun and a whole lot easier. Your lawns and parks can be beautiful and healthy in no time, with the help of Ventrac.

1-888-765-0814

Ventrac 3400 Series Rear Discharge Mower

3400 Series Rear Discharge Mower

The Ventrac LK520 Rear Discharge Mower from Venture Products, Inc. is designed for superior trimming on both the left and right sides. With its 52-inch cutting width and 15 cutting positions, mowing just became a lot more fun and a whole lot easier. Your lawns and parks can be beautiful and healthy in no time, with the help of Ventrac.

1-888-765-0814

Ventrac Reel Mower

Reel Mower

The Ventrac MR740 Triplex Reel Mower is designed to be the ultimate trim and surround mower. With a 74" width of cut, variable speed hydraulics, standard back lapping valves, and offset capability, the Ventrac MR740 includes many features to ensure superior, low-maintenance powered by the all-wheel performance.

1-888-765-0814

Ventrac 4500 Series Side Discharge Mower

4500 Series Side Discharge Mower

Ventrac HM & HP Mower Decks utilize a rugged all steel frame design, which suspends the Ventrac's progressive discharge deck. This design gives you a high efficiency grass discharge for a better quality of cut by moving more grass efficiently through the deck tunnel. With the removal of two pins beneath the cross frame, the deck can be easily tilted to a near vertical position for maintenance and storage.

1-888-765-0814

Ventrac 3400 Series Side Discharge Mower

3400 Series Side Discharge Mower

Ventrac LM Mowers have cutting widths of 52 and 60 inches (132, 152 cm) and utilize a rugged all steel frame design, which suspends the Ventrac's discharge deck. This design gives you a high efficiency grass discharge for a better quality of cut by moving more grass efficiently through the deck tunnel. With the removal of two pins beneath the cross frame, the deck can be easily tilted to a near vertical position for maintenance and storage.

1-888-765-0814

Ventrac Tough Cut Mower

Tough Cut Mower

The HQ680 Tough Cut Mower is designed for mowing high grass, thick weeds and brush. A large baffled front opening allows brush to enter for cutting and hinders debris from escaping.

1-888-765-0814

SPECIALTY ATTACHMENTS
Ventrac Ballpark Groomer

Ballpark Groomer

Grounds maintenance professionals know the value of reducing or eliminating hand work and they appreciate premium results. This is what the Ventrac Ballpark Groomer brings to the table. Ventrac is the solution for efficient ball field maintenance that also elevates the image and quality of the facility.

1-888-765-0814

Ventrac Ballpark Renovator

Ballpark Renovator

Grounds maintenance professionals know the value of reducing or eliminating hand work and they appreciate premium results. This is what the Ventrac Ballpark Renovator brings to the table. Ventrac is the solution for efficient ball field maintenance that also elevates the image and quality of the facility.

1-888-765-0814

Ventrac Edger

Edger

The ED200 Edger is designed to edge sidewalks, curbs, and cart paths as well as edging and maintaining flower and mulch beds. Edging can be done on either the right or left side per the operator's choice.

1-888-765-0814

Ventrac Sod Cutter

Sod Cutter

Ideal for landscapers or homeowners, the EC240 sod cutter cleanly cuts sod for flowerbeds, walkways, and lawns. With a cutting depth of 0 to 2 1/2, the EC240 can be used to cut thick lush grass or even to shave off the last bit of dirt to prepare your work site.

1-888-765-0814

Ventrac 4500 Series Stump Grinder

4500 Series Stump Grinder

The KC180 Stump Grinder makes quick work of unwanted stumps and roots. Heavy-duty carbide cutters provide extended and effective performance in spite of dirt, stones, and debris in work area.

1-888-765-0814

Ventrac 3400 Series Stump Grinder

3400 Series Stump Grinder

The LC150 Stump Grinder makes quick work of unwanted stumps and roots. Heavy-duty carbide cutters provide extended and effective performance in spite of dirt, stones, and debris in work area. The stump grinder mounted on the 3000 Series tractor creates an agile, powerful machine for even the toughest jobs in the tightest places.

1-888-765-0814

Featured Listings


New Ventrac HB580 Power Broom. The HB580 Power Broom is designed for sweeping and removal of material such as snow, leaves, dirt, light gravel, and even thatch. A...



The Ventrac 4500Y is powered by a 25 HP Kubota engine, model D902, and is geared for high torque and maximum diesel performance. Like all Ventrac tractors, the 4500Y utilizes...



The HQ680 Tough Cut Mower is designed for mowing high grass, thick weeds, and heavy brush. A large baffled front opening helps direct materials into the deck and helps hinder...